RSS Feed for this tag 13 applications totalLast updated: Sep 15th 2014, 13:23 GMT

HP ProLiant MicroServer Gen8 Emulex LAN Driver 10.2.298.19

134
downloads

Windows 2008

Sep 15th 2014, 13:23 GMT

A resource agent that allows to manage a fibre channel target realized with Qlogic fibre channel cards and the open source generic SCSI target SCST. With this resource agent you can run multiple intances of NPIV fibre channel targets on you HBAs. You can utilize 1 up to 255 HBAs for multipathing.
The Emulex OneCore Storage SDK supports the Service Level Interface 4 (SLI-4) API and is compatible with the latest generation of Emulex 8 and 16 Gb/s Fibre Channel HBAs (LPe15000 and LPe16000 series), as well as the latest generation of 10 and 40 Gb/s FCoE UCNAs (OCe14000-series).
Emulex Drivers for Linux Release Notes 4 pub-005650 3. SCSI errors might occur on deletion of Vports/PCI Hot Unplug. On occasion, the kernel might report SCSI errors when deleting Vports through the sysfs interface or performing a PCI Hot Unplug of a Broadcom Emulex adapter: kernel: Synchronizing SCSI cache for disk kernel: FAILED Or.

HP ProLiant MicroServer Gen8 Emulex LAN Driver 10.2.298.37

86
downloads

Windows 2008

VMware ESXi 6.7 elxiscsi 12.0.1108.0 iSCSI driver for Emulex and OEM Branded Adapters; File size: 3.39 MB; File type: zip; Read More. Old look: Emulex Ha:0 0112E2 LUN:02 New look: Elx 4CF927496,02 00 1 (Elx HBA#, WWPN, LUN# PCI bus# and PCI function#) (CR23586) (CR18228) 3. Reduced the number of SCSI REPORTLUNS commands issued in the configuration utility from two to one. Changed the word 'bring' to 'bringing' on the Emulex Bios Utility display message.

Sep 9th 2014, 12:22 GMT

HP ProLiant MicroServer Gen8 Emulex LAN Driver 10.2.254.0

67
downloads

Windows 2008

Sep 9th 2014, 12:21 GMT

HP ProLiant MicroServer Gen8 Emulex LAN Driver 10.0.430.1109

198
downloads

Windows 2008

Mar 5th 2014, 09:56 GMT Download Emulex SCSI & RAID Devices Driver

HP ProLiant MicroServer Gen8 Emulex LAN Driver 4.9.160.0

106
downloads

Windows 2008

Mar 5th 2014, 09:54 GMT

HP Emulex OneConnect UCNA Firmware 4.2.401.2215

500
downloads

OS Independent

Jul 13th 2013, 08:35 GMT

Intel S1200BTS Server Board Emulex/Matrox Graphics Driver 20120831 for Server 2012

1,665
downloads

Windows Server 2012

Apr 10th 2013, 06:33 GMT

Windows 2003

Apr 11th 2007, 08:50 GMT

Unix, Windows All, Mac, Linux, Windows Server 2019, Windows Server 2016, Windows 10 64 bit, Windows 10, Windows 8.1 64 bit, Windows 8.1, OS Independent, Windows Server 2012, Android, Windows 8 64 bit, Windows 8, Windows 7 64 bit, Windows 7, Windows Vista 64 bit, Windows 2008, Windows XP 64 bit, Windows Vista, Windows 2003, Windows XP, Windows 2K, Windows NT, Windows ME, Windows 9X

Apr 11th 2007, 08:33 GMT

Apr 11th 2007, 08:11 GMT

Apr 11th 2007, 07:56 GMT

Emulex LP9002-E/LP9002L-E Firmware 3.92a2

1,961
downloads

Apr 11th 2007, 07:13 GMT

Apr 11th 2007, 07:03 GMT

A step by step how to configure hardware iSCSI (Emulex 10Gb) on XenServer.

Although Citrix does not support officially Emulex HBA’s, and even suggests you not to use it at all, you can try to configure hardware 10Gb iSCSI by your own.

Tested on: HP c7000 blade chassis, HP BL685c G7 blades with Emulex OneConnect 10Gb NIC/iSCSI/FCoE HBA, HP ProCurve 6120XG Blade Switch, HP P2000 G3 10Gb iSCSI Storage and XenServer 5.6.

I assume you have configured iSCSI network according to Citrix/RHEL suggestions. That basically means:

separate iSCSI network
enabled Flow Control and Jumbo frames on 10GbE switches, storage controllers
configured RAID groups with proper mappings on storage array

1) Be sure XenServer kernel “knows” about your Emulex 10GbE iSCSI HBA

2) Emulex OneCommand Manager CLI

To configure Emulex HBA you can use Emulex 10GbE iSCSI Bios (type Ctr S during server start when iSCSI HBAs will appear) or you can use software provided by Emulex which should be installed on XenServer by default. It is highly advisable to read this User Manual.

To list HBA’s on the system type as a root “hbacmd listhbas”:

Apart from not loading QLogic libs error it returns nothing. Therefore you may suspect that OneCommand daemons were not started. To start them manually type as a root /usr/sbin/ocmanager/start_ocmanager. If there is a libsensors error while starting iSCSI SNMP Daemon install lm_sensors package and restart OCM.

Now when OCM Daemons are runnning, and QLogic is commented (/etc/hba.conf) you can check iSCSI HBAs:

In case you get nothing run command without “pt=iscsi” and find Model section e.g.:

Model : NC551i

That means XenServer official driver does not support this model of HBA, therefore you need to download the driver from Emulex site.

If the command returned list of iSCSI HBAs just skip the next step and proceed with configuration section.

3) Emulex 10Gb iSCSI driver

I have checked this also on new release of XenServer 6.0. Well sadly, on both XenServer (5.6/6.0) installations, I have the same be2iscsi driver version – 2.0.549.0:

The solution for this is to download the newest driver from Emulex site. Download and install a proper iSCSI binary RPM driver kit Version x.x.x.x.x driver and install script for your Citrix XenServer version, e.g.: version 4.0.317.0 – solves the problem (unfortunately this solution does not work for XenServer 6.0 due to the problem with emulex driver for 6.0 release).

If Windows doesn't find a new driver, you can try looking for one on the device manufacturer's website and follow their instructions. Reinstall the device driver. In the